65 12 230 Removing and installing (replacing) DAB tuner

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

NOTE: FOLLOW INSTRUCTIONS FOR HANDLING OPTICAL FIBRES.

Necessary preliminary tasks:

E72 Only: Disconnect BOTH NEGATIVE BATTERY CABLES
Clamp off battery negative lead
Remove LUGGAGE COMPARTMENT TRIM PANEL on left side wall

Release screws (1).

Disconnect plug connections (2) and remove DAB tuner (3) from holder (4).

Fig 1: Identifying Plug Connection, DAB Tuner, Holder And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out VEHICLE PROGRAMMING/ENCODING .