63 31 255 Removing and installing/replacing optical fibre in rear left or right door trim panel
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Follow instructions for HANDLING LIGHT BULBS (INTERIOR LIGHTS) .
Necessary preliminary tasks:
- Remove REAR DOOR TRIM PANEL
Release retaining clips (1) for optical fibre (2) from door trim panel (3).
Carefully feed optical fibre (2) in direction of arrow out of door trim panel (3) and remove.
Installation:
Make sure retaining clips (1) are correctly engaged on door trim panel (3).