63 31 193 Replacing LED for rear inside door opener
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove REAR DOOR TRIM PANEL
Detach wiring harness holder (1) and insulating tape (2) from door trim panel (3).
Unclip LED for inside door opener (4) in direction of arrow from door opener (5) and remove.
Installation:
Make sure LED for inside door opener (4) is correctly seated on door opener (5).