63 31 178 Removing and installing/replacing LED for storage box

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove STORAGE BOX

Pull LED for storage box (1) in direction of arrow out of storage box (2).

Feed wiring harness (3) out of storage box (2) and remove LED for storage box (1).

Installation:

Note installation position of LED for storage box (1). Light outlet side must be positioned in direction of storage box (2).

Fig 1: Identifying Storage Box And Wiring Harness

Courtesy of BMW OF NORTH AMERICA, INC.

Make sure wiring harness (3) is correctly laid on storage box (2).