63 25 000 Removing and installing/replacing auxiliary brake light
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with notes on protection against electrostatic damage (ESD PROTECTION)
.
Necessary preliminary tasks:
Disconnect plug connection (1).
Unlock slide (2) on both sides and remove supplementary brake light (4) from rear window (3).
Installation:
Make sure supplementary brake light (4) is correctly positioned and engaged on rear window (3).