27 10 720 Replacing servomotor (ATC 700)

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: After replacement:, the "Repair" service function must be carried out with in the BMW diagnosis system.

Necessary preliminary tasks:

REMOVE TRANSMISSION CROSS-MEMBER

Disconnect plugs (1) and (2).

Tightening torque 27 00 14AZ .

Fig 1: Identifying Servomotor Plugs

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws and remove servomotor from transfer box.

Tightening torque 27 00 13AZ .

Fig 2: Locating Servomotor Screws

Courtesy of BMW OF NORTH AMERICA, INC.