22 11 011 Replacing left engine mount (N63, S63)

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

SECURE engine in installation position
Lower FRONT AXLE SUPPORT

Release screws (1).

Tightening torque 22 11 1AZ .

Remove engine mount (2).

Fig 1: Identifying Engine Mount Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Holes (1) in engine mount must point to center of vehicle.

Fig 2: Identifying Holes In Engine Mount

Courtesy of BMW OF NORTH AMERICA, INC.