67 13 001 Replacing drive unit for electrically operated left or right exterior mirror

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove MIRROR GLASS for rear-view mirror

Release screws (1) and remove drive (2).

Fig 1: Identifying Screws And Drive

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Fit drive for electrically operated exterior mirror (1) so that pin housing (2) engages exactly in plug housing (3) and locators (4) slide into guides (5).

Fig 2: Identifying Door Mirror, Pin Housing, Plug Housing And Guides

Courtesy of BMW OF NORTH AMERICA, INC.