51 43 230 Removing and installing/replacing trim on C-pillar at bottom left or right

WARNING: This page is about a different car, the 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

Detach mucket (1) along trim (2).

Release clips (3 and 4) with special tool 00 9 317 .

Installation:

Make sure the trim cover is correctly seated in mounts.

Fig 1: Identifying C-Pillar Trim, Mucket And Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1 and 2) on trim (4) must not be damaged.

Replace missing and damaged clips (3 and 5).

Fit all clips with sealing ring.

Make sure clips are installed in correct position.

3 White clip
5 Light brown clip

Fig 2: Identifying C-Pillar Trim, Guides And Clips
Courtesy of BMW OF NORTH AMERICA, INC.