51 43 148 Removing and installing or replacing trim on left or right door pillar (top)

WARNING: This page is about a different car, the 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove PANEL FOR DOOR PILLAR (BOTTOM)

Detach edge protector (1) in area of trim (2).

Pull off trim (2) towards bottom.

Complete removal only:

Release BELT SCREW on front seat.

Feed out belt strap (3) from trim (2).

Fig 1: Identifying Edge Protector, Door Pillar Trim And Belt Strap

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) and clips (2) on trim (3) must not be damaged.

Fig 2: Identifying Door Pillar Trim, Guides And Clips

Courtesy of BMW OF NORTH AMERICA, INC.