51 34 425 Removing and installing/replacing trim on window frame of rear door (rear), left or right

WARNING: This page is about a different car, the 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Detach seal (1) from trim (3).

Unfasten screws (2).

Remove trim (3) towards rear.

Fig 1: Identifying Rear Door Trim, Seal And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Trim (1) must be located over side window frame (2).

Ensure seal (3) is correctly seated.

Fig 2: Identifying Side Window Frame, Trim And Seal

Courtesy of BMW OF NORTH AMERICA, INC.