51 49 017 Removing and installing/replacing trim panel for rear window frame on (inside) left or right

WARNING: This page is about a different car, the 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRIM PANEL AT TOP

Detach trim panel (1) from retainers (2) towards inside.

Installation:

If necessary, replace faulty retainers (2).

Fig 1: Identifying Rear Window Frame Trim Panels And Retainers

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Tabs (1) on panel (2) must not be damaged.

Fig 2: Identifying Rear Window Frame Trim Panel And Tabs

Courtesy of BMW OF NORTH AMERICA, INC.