51 22 300 Removing and installing/replacing outer weather strip on rear door on left or right
WARNING: This page is about a different car, the 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
IMPORTANT:
If reusing the existing weather strip (1), make sure it is not bent.
Lever out weather strip (1) with special tool 00 9 324
(starting at B-pillar).
Simultaneously lift out weather strip (1) with special tool 00 9 317
in the vicinity of the B-pillar.
Courtesy of BMW OF NORTH AMERICA, INC.