51 45 185 Removing and installing/replacing panel for pedals

WARNING: This page is about a different car, the 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Move driver's seat completely towards rear.

Release screws (1).

Feed out trim for pedal assembly.

Disconnect associated plug connections and remove trim for pedal assembly.

Replacement:

Remove FOOTWELL LIGHT .

If necessary, remove speaker for handsfree system.

Fig 1: Identifying Pedal Assembly Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Additionally on Security (optional extra SA 106):

Remove intercom system speaker.