11 65 712 Removing and installing/replacing electric changeover valve on exhaust turbocharger, left (N63 hybrid)

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: High-voltage system - danger to life!

Necessary preliminary tasks:

Remove left TURBOCHARGER .

Release screws (1).

Remove electric changeover valve.

Installation:

Replace O-ring.

Fig 1: Identifying Electric Changeover Valve Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Follow diagnosis instruction.

Complete vehicle
Drive
Engine electrical system
Air supply
Boost pressure control