11 14 085 Removing and installing gear case cover, top right (N63 hybrid)

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: High-voltage system - danger to life!

Gear case cover, cylinders 1-4

Necessary preliminary tasks:

Remove both SOLENOID VALVES on right side

Release screws (1).

Tightening torque 11 14 3AZ .

Remove timing case cover (2).

Installation:

Replace seal.

Fig 1: Identifying Timing Case Cover And Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.