64 11 990 Removing and installing/replacing sensor for automatic recirculated air control (AUC)

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove RIGHT MICROFILTER HOUSING COVER

Disconnect plug connection (1).

Unlock AUC sensor (2) and remove.

Installation:

Make sure AUC sensor (2) is securely seated.

Fig 1: Identifying Plug Connection And AUC Sensor

Courtesy of BMW OF NORTH AMERICA, INC.