64 11 906 Removing and installing/renewing ventilation temperature sensor (center fresh-air grille)
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove CENTRE FRESH-AIR GRILLE
Disconnect plug connection (1).
Turn temperature sensor (2) in direction of arrow as far as it will go.
Remove temperature sensor (2) from center fresh-air grille (4).
Installation:
On version with two temperature sensors, pay attention to lead identification (3):
- Always connect lead identification (3) on right from driver's viewpoint
Make sure temperature sensor (2) is correctly engaged in middle fresh-air grille (4).