64 11 842 Replacing actuator drive for right footwell flap
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove INSTRUMENT PANEL TRIM
Disconnect plug connection (1).
Release screws (2) and remove servomotor.
Replacement:
Servomotors must be re-addressed in the event of replacement!
Addressing can only be carried out with the BMW diagnosis system.
Service functions:
- Body
- Heating and air conditioning function
- Flap motors
- Re-address flap motors