64 11 840 Replacing actuator drive for left footwell flap
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove CARRIER FOR INSTRUMENT PANEL
- If necessary, remove left side section housing
- If necessary, remove air duct at side
Release screws (1).
Disconnect plug connection (2) and remove servodrive.
Replacement:
Servomotors must be readdressed in the event of replacement!
Addressing can only be carried out with the BMW diagnosis system.
Service functions:
- Body
- Heating and air conditioning function
- Flap motors
- Readdress flap motors