64 11 837 Replacing actuator drive for right stratification flap

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove INSTRUMENT PANEL TRIM

NOTE: For purposes of clarity, following graphics show instrument panel carrier removed.

Release screws (1).

Remove servomotor (2) and disconnect plug connection (3).

Fig 1: Identifying Servomotor, Plug Connection And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Servomotors must be re-addressed in the event of replacement!

Addressing can only be carried out with the BMW diagnosis system.

Service functions:

Body
Heating and air conditioning function
Flap motors
Re-address flap motors