64 11 822 Replacing actuator drive for left rear cabin blending flap

Necessary preliminary tasks:

• Remove CARRIER FOR INSTRUMENT PANEL

Release screws (1) and feed out air duct (2).

Fig 1: Identifying Air Duct And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release screws (2) and remove servomotor (3).

Fig 2: Identifying Plug Connection, Servomotor And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Servomotors must be readdressed in the event of replacement!

Addressing can only be carried out with the BMW diagnosis system.

Service functions:

• Body
• Heating and air conditioning function
• Flap motors
• Readdress flap motors