64 11 376 Removing and installing (replacing) control panel for heating and air conditioning system

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove MIDDLE COVER FOR THE DASHBOARD

Disconnect plug connection (1).

Unclip control panel (2) along dashed line from cover (3) and remove.

Fig 1: Identifying Plug Connection, Control Panel And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

When replacing or programming

Carry out normalization of electric steering column adjustment

Replacement:

Carry out PROGRAMMING/ENCODING .