34 41 682 Initializing parking brake (after manual unlocking of actuating unit)
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
When the actuating unit is manually unlocked, the actual status of the parking brake may not correspond to the status indicated by the indicator lamp.
Vehicle condition before initialization:
Vehicle condition before initialization:
- Rectify fault
- Vehicle stationary
- Ignition turned on
Press parking brake button with brake activated.
NOTE:
The indicator lamp in the instrument cluster goes out as soon as the parking brake is ready for operation again.
It is normal for noises to be heard.
Startup can take several seconds.
It is normal for noises to be heard.
Startup can take several seconds.