34 00 012 Parking brake function check
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Connect BMW Diagnosis and Information System (DIS) or MoDiC.
Call up "Workshop breaking-in" service function.
Start breaking-in program.
(Parking brake indicator lamp in instrument cluster flashes at low frequency)
Drive vehicle onto roller dynamometer and pull parking brake button once.
Parking brake is applied at approx. 15 km/h with reduced force.
(Parking brake indicator lamp in instrument cluster flashes at high frequency)
Breaking-in procedure takes 3 minutes.
Breaking-in procedure can be terminated by pressing the parking brake button.
Delete fault memory.