72 11 041 Removing and installing/replacing front left or right lower belt fitting (seat belt tensioner)

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove FRONT SEAT

Unlock PLUG CONNECTIONS and disconnect.

Installation:

Belt tensioner (1) is coded against incorrect installation.

Fig 1: Identifying Belt Tensioner

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Installation:

Replace screw (1).

Tightening torque 72 11 03AZ .

Remove belt tensioner (2).

Fig 2: Identifying Belt Tensioner And Screw

Courtesy of BMW OF NORTH AMERICA, INC.