72 12 000 Removing and installing or replacing airbag module on passenger side

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Read and comply with SAFETY REGULATIONS for handling airbag modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.

Necessary preliminary tasks:

Clamp off BATTERY NEGATIVE LEAD
Remove instrument panel trim

Unclip airbag lead with holders (1) from instrument panel.

Fig 1: Identifying Airbag Lead Holders

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (1).

Installation:

Replace nuts.

Tightening torque 72 12 01AZ .

Remove airbag module from instrument panel.

Fig 2: Identifying Airbag Module Nuts

Courtesy of BMW OF NORTH AMERICA, INC.