12 72 520 Removing and installing/replacing pedal travel sensor (M62, M54)

WARNING: This page is about a different car, the 2003 BMW X5 and 2002 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

(for work step number 13 00 002 CHECKING FUNCTION OF DIGITAL ENGINE )

Switch off ignition.

Carefully press down locking lug (1) and pull out accelerator pedal module (2) at side.

Fig 1: Removing Accelerator Pedal Module

Courtesy of BMW OF NORTH AMERICA, INC.

Detach plug (1) from accelerator pedal module (2).

Fig 2: Detaching Plug From Accelerator Pedal Module

Courtesy of BMW OF NORTH AMERICA, INC.