52 10 Front seats
WARNING: This page is about a different car, the 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - FRONT SEATS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Seat to floor panel | E70 / E71 / E72 | (trilobular) | Replace Powerlok screw | 43 Nm |
| 2AZ Backrest frame to seat frame | E70 / E71 / E72 | (trilobular) | Replace Powerlok screw | 31 Nm |
| 3AZ Active head restraint - Sliding rails with gas cartridge | E70 / E71 / E72 | 8 Nm | ||
| 4AZ Carrier section for electr. operating unit | E70 / E71 / E72 | 8 Nm | ||
| 5AZ Cover to seat | E70 / E71 / E72 | 4 Nm | ||
| 6AZ Seat rails to seat frame | E70 / E71 / E72 | 27 ± 3 Nm | ||
| 7AZ Adjusting switch to cover | E70 / E71 / E72 | 2 Nm | ||
| 8AZ Seat angle adjustment to seat mechanism | E70 / E71 / E72 | M8x30 | 27 ± 3 Nm | |
| 9AZ Seat depth adjustment | E70 / E71 / E72 | 3, 0 + 0, 5 Nm | ||
| 10AZ Gearbox for backrest upper section adjustment | E70 / E71 / E72 | 2, 5 + 0, 5 Nm | ||
| 11AZ Retaining screw on head restraint | E70 / E71 / E72 | 4, 0 ± 0, 2 Nm |