51 13 Trim Parts, Covers, Handle Strip
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRIM PARTS, COVERS, HANDLE STRIP
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bracket, roof luggage rack on body | E39 / E46 / E81 / E82 / E87 / E90 / E91 / E92 / E36 / Z3 and M CoupeA | M10 | 20 Nm | |
| 2AZ Gutter strip to body (plastic nut) | E46 | 1 Nm | ||
| Gutter strip to body (metal nut or rivet nut) | E46 | 1.8 Nm | ||
| 3AZ Roof railing to body | E39 | Centre, front, rear | 24 Nm | |
| E61 | M8 | 16 Nm | ||
| settling time | 15 min | |||
| Check | 16 Nm | |||
| E83 | M8 | Front | ||
| Jointing torque | 21 Nm | |||
| Release nut after settling time | 15 min | |||
| Jointing torque | 21 Nm | |||
| Angle of rotation | 120 ± 10° | |||
| E83 | M8 | Centre, rear | 21 Nm | |
| settling time | 15 min | |||
| Check | 21 Nm | |||
| E70 / E84 / E91 | 19 Nm | |||
| E71 / E72 | 16 Nm | |||
| 4AZ Handle strip to tailgate | E39 / Touring | 3 Nm | ||
| E46 / E53 | 2.5 Nm | |||
| E83 | 1.8 Nm | |||
| 5AZ Cowl panel cover to body | E60 / E61 / E63 / E64 | 2.5 Nm | ||
| 6AZ Centre trim to tailgate | E65 / E66 / E67 | M8 | 2.5 Nm | |
| 7AZ Trim to engine compartment lid | E90 / E91 | 2 Nm | ||
| 8AZ Additional brake light to tailgate | E89 | 5 Nm | ||
| 9AZ Threaded bolt on sliding carriage (roof railing) | E84 | 15 Nm | ||
| 10AZ Decorative trim, side, to cowl panel | E88 / E93 | 1.8 Nm |