41 35 Side walls
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SIDE WALLS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Front side panel to body | E63 / E64 | M6x22 10.9 | 12 Nm | |
| E83 | ST6.3x14 | 7 Nm | ||
| E60 / E61 / E81 / E82 / E85 / E86 / E87 / E88 / E90 / E91 / E92 / E93 / E84 | M6 | 7.6 Nm | ||
| E89 | M6 | 8 Nm | ||
| 2AZ Front side panel to body | E63 / E64 | M6 nut | 5 Nm | |
| E60 / E61 | M6 nut | 7.6 Nm | ||
| E89 | M6 nut | 8 Nm | ||
| 3AZ Front side panel to body | E60 / E61 | Sheet metal screw ST4.8x19 | 7.6 Nm | |
| 4AZ Combination holder, side panel, front, to body | E81 / E82 / E87 / E88 / E92 | M6 | 7.6 Nm | |
| 5AZ Rear side panel to body | E85 / E86 / E89 | M6 | 7.6 Nm | |
| 6AZ Side panel, front, to module carrier/bumper carrier | E70 / E71 / E72 | M6x16 | Replace bolts | 4 Nm |
| 7AZ Front side panel to body Area, A-pillar | E70 / E71 / E72 | M6x16 | Replace bolts | 8 Nm |
| 8AZ Front side panel to body Area, sill | E70 / E71 / E72 | Sheet metal screw ST4.8x19 | Replace bolts | 2.5 Nm |
| 9AZ Front side panel to body | E70 / E71 / E72 | M5x20 | Replace bolts | 5 Nm |
| 10AZ Module carrier, top, to Carrier support | E70 / E71 / E72 | M6x26 | Replace bolts | 8 Nm |
| 11AZ Module carrier, bottom, to engine support | E70 / E71 / E72 | M6 nut | 7 Nm |