11 53 000 Removing and installing/replacing coolant thermostat (M62)
WARNING: This page is about a different car, the 2003 BMW X5 and 2002 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Remove upper section of suction filter housing with mass air flow sensor.
Unscrew and remove splash guard.
Drain off coolant and dispose of correctly.
Installation:
Vent cooling system and check for leaks,
refer to 17 00 005 DRAINING AND TOPPING UP COOLANT (M62) .
- Disconnect coolant hose.
- Disconnect plug-in connection.
- Remove thermostat housing cover with integrated thermostat.
Installation:
Replace sealing ring.