31 60 Output shaft
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OUTPUT SHAFT
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Output shaft console to engine oil sump |
E70, E70M / E71, E71M / E72 |
M8 |
|
19 Nm |
| 2AZ Output shaft to wheel bearing |
E70, E70M / E71, E71M / E72 |
M27 |
Replace collar nut, lightly oil contact surface |
420 Nm |