13 62 Senders for Control Unit
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SENDERS FOR CONTROL UNIT
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Temperature sensor, coolant / oil | N63 / S63 | M12x1.5 | 13.5 Nm | |
| 2AZ Pressure sensor to intake manifold | N63 / S63 | K50x14 | 3.5 Nm | |
| 3AZ Camshaft sensor to cylinder head | N63 / S63 | M6 | 9 Nm | |
| N63 / S63 | K50 | 5 Nm | ||
| 4AZ Crankshaft sensor to transmission | N63 / S63 | M6 | 9 Nm | |
| 5AZ Knock sensor to crankcase | N63 / S63 | M8 | 21.5 Nm | |
| 6AZ Air-mass meter to upper section of intake filter housing | N63 | K50x16 | 3.5 Nm | |
| 7AZ Pressure sensor to intercooler | N63 / S63 | M6 | 4 Nm |