12 36 Control units (electric machines)
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CONTROL UNITS (ELECTRIC MACHINES)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Cover power electronics box | E72 | M6 | 8.8 Nm | |
| 2AZ Power electronics box to power electronics box bracket | E72 | M6 | 8.8 Nm | |
| 3AZ Crash element to power electronics box | E72 | M6 | 8.8 Nm | |
| 4AZ Earthing cable to hybrid power distribution box | E72 | 5.6 Nm | ||
| 5AZ Lid on power electronics box | E72 | M6 | 8.8 Nm | |
| 6AZ High-voltage cables to power electronic box | E72 | M6 | 8.8 Nm | |
| 7AZ High-voltage cables bracket to power electronic box | E72 | M6 | 8.8 Nm | |
| 8AZ APM to power electronic box bracket | E72 | M6 | 8.8 Nm | |
| 9AZ Battery positive cable to APM | E72 | M8 | 15 Nm | |
| 10AZ Hybrid power distribution box to power electronics box bracket | E72 | M6 | 5.6 Nm | |
| 11AZ Holder, power electronic box to body | E72 | M8 | Replace screws | |
| Jointing torque | 15 Nm | |||
| Angle of rotation | 90 ° | |||
| 12AZ Holder, power electronic box to V-strut | E72 | M8 | Jointing torque | 15 Nm |
| Angle of rotation | 90 ° | |||
| 13AZ Power distribution box to power electronic box bracket | E72 | 5.0 Nm | ||
| 14AZ Heat protection plate | E72 | M6 | 5.8 Nm | |
| 15AZ Additional grounding cable between holder for power electronic box and Advanced Power Management (APM) | E72 | M8 | 9.5 Nm | |
| 16AZ Reverse polarity protection to holder for power electronic box | E72 | M8 | 15 Nm | |
| 17AZ Grounding cable to holder for power electronic box | E72 | M8 | 15 Nm |