11 65 Turbocharger and Control
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TURBOCHARGER AND CONTROL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Exhaust manifold to turbocharger (D80 V-band clamp). | N63 | M8 | Replace V-band clamp | 13 Nm |
| 2AZ Turbocharger to primary catalyst (D108 V-band clamp). | N63 | M8 | Replace V-band clamp | 13 Nm |
| 3AZ Heat protection plate | N63 | M6 x 12 | 10 Nm | |
| 4AZ Heat shield to crankcase, oil return cover or cylinder head. | N63 | M6 x 14 | 10 Nm | |
| 5AZ Heat shield to crankcase. | N63 | M6 x 22 | 10 Nm | |
| 6AZ Vacuum reservoir to crankcase and cylinder head. | N63 | M6 x 14 | 10 Nm | |
| 7AZ Bracket, electropneumatic pressure converter, to cylinder head. | N63 | M6 x 18 | 10 Nm | |
| 8AZ Hexagon nut (2 x) Electropneumatic pressure converter to bracket. |
N63 | BM6 | 10 Nm | |
| 9AZ Blow-off valve to exhaust turbocharger | N63 | M6 | 9 Nm |