11 51 Coolant pump
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - COOLANT PUMP
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Coolant pump to gear case. | N63 | M6x25 M6x70 M6x90 | Replace seal. | 10 Nm |
| 2AZ Coolant temperature sensor to coolant pump. | N63 | M12 x 1.5 | 13 Nm | |
| 3AZ Pipe to coolant pump. | N63 | M6 | Replace sealing ring. | 10 Nm |
| 4AZ Supplementary coolant pump to bracket. | N63 | M6 x 12 | 10 Nm |