11 41 Oil Pump with Strainer and Drive
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL PUMP WITH STRAINER AND DRIVE
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Intake manifold to oil pump | N63 | M6 | 10 Nm | |
| 2AZ Oil pump to bearing cap | N63 | M8 | 24 Nm | |
| 3AZ Oil pump cover to housing | N63 | M6 | 10 Nm | |
| 4AZ Sprocket to oil pump | N63 | M10 | Important - left-hand thread | |
| 1. Jointing torque | 20 Nm | |||
| 2. Angle of rotation | 40 ° | |||
| 5AZ Oil pump sprocket to hub | N63 | M6 | 10 Nm | |
| 6AZ Oil deflector to oil pump | N63 | M6 | 10 Nm |