11 36 Variable camshaft control
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ VANOS gear to inlet and exhaust camshafts | N63 | M10x1 | Replace screw | |
| Jointing torque | 30 Nm | |||
| Torque angle | 90 ° | |||
| 2AZ Non-return valve VANOS to cylinder head | N63 | M14 x 1.5 | 13 Nm | |
| 3AZ Solenoid valve holder to cylinder head | N63 | M6 | 10 Nm |