11 31 Camshaft
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CAMSHAFT
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Tensioning rail and guide rail, cyl. 1 to 4, to crankcase | N63 | M10x1.25 | Insert screws dry | 46 Nm |
| 2AZ Tensioning rail and guide rail, cyl. 5 to 8, to crankcase | N63 | M8x1.25 | 20 Nm | |
| 3AZ Guide rail to cylinder head | N63 | M14x1.5 | Replace sealing ring | 25 Nm |
| 4AZ Sliding rail to cylinder head | N63 | M7 | 15 Nm | |
| 5AZ Chain tensioner to cylinder head | N63 | M7 | 13 Nm | |
| 6AZ Camshaft bearing cap to cylinder head | N63 | M7 | 15 Nm | |
| 7AZ Camshaft step bearing cap to cylinder head | N63 | M7 | 15 Nm |