11 13 Oil sump
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL SUMP
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Oil drain plug | N63 | M18 x 1.5 | Replace sealing ring | 40 Nm |
| 2AZ Oil sump upper part to crankcase | N63 | M8 | 25 Nm | |
| 3AZ Oil sump bottom section to oil sump upper part | N63 | M8 | Replace microencapsulated screws | 27 Nm |
| 4AZ Oil deflector to oil sump upper part | N63 | M6 | 10 Nm | |
| 5AZ Screw plug, oil channel, to oil sump upper part | N63 | M24x1.5 | Replace sealing ring | 50 Nm |
| 6AZ Oil condition sensor to oil sump bottom section | N63 | M6 | Replace O-ring | 8.5 Nm |