11 12 Cylinder Head And Cylinder Head Cover
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CYLINDER HEAD AND CYLINDER HEAD COVER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Cylinder head bolt | N63 | M11 x 1.5 | Replace screws. with part number 7 582 454 |
|
| Jointing torque | 30 Nm | |||
| 1. Angle of rotation | 90 ° | |||
| 2. Angle of rotation | 90 ° | |||
| 1AZ Cylinder head bolt | N63 | M11 x 1.5 | Renew screws with part number: 7 607 557 | |
| Jointing torque | 30 Nm | |||
| 1. Angle of rotation | 90 ° | |||
| 2. Angle of rotation | 140 ° | |||
| 2AZ Cylinder head bolt | N63 | M8 | 23 Nm | |
| 3AZ Cylinder head cover to cylinder head. | N63 | M6 | 10 Nm | |
| 4AZ Metal bracket to cylinder head. | N63 | M6 x 16 | 8 Nm | |
| 5AZ Lifting eye to cylinder head. | N63 | M8 | 20 Nm | |
| 6AZ Ignition coil cover to cylinder head cover. | N63 | M6 x 20 | 4 Nm | |
| 7AZ Non-return valve | N63 | M14 x 1.5 | 20 Nm | |
| 8AZ Vent connection | N63 | M8 x 1 | Replace sealing ring. | 15 Nm |
| 9AZ ASA screw (2 x) Oil filler neck to cylinder head cover. |
N63 | M6 x 20 | Replace sealing ring. | 10 Nm |