11 00 Standard screw connection
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - STANDARD SCREW CONNECTION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Screws and nuts | M5 | 5 Nm ± 0.5 | ||
| 2AZ Screws and nuts | M6 | 8 Nm±1 | ||
| 3AZ Screws and nuts | M7 | 13 Nm±2 | ||
| 4AZ Screws and nuts | M8 | 19 Nm±3 | ||
| 5AZ Screws and nuts | M10 | 38 Nm±5 | ||
| 6AZ Hose clamp, WAF 5 | 1.0 to 1.5 Nm | |||
| 7AZ Hose clamp, WAF 6 | 2.5 up to3.5 Nm |