51-2190 Adjuster

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0494325 512190 Adjuster Minimum set: Mechanical tools MW

NOTE: (door lock tensioner) For pre-tensioning front and rear door locks when installing. Change to tool through use of noise-optimized locks from 02/2004. Illustration items: 1 = Knurled nut 51 2 191 2 = Support 51 2 192 3 = Guard 51 2 196 4 = Mandrel 51 2 197 [Released]

Fig 1: Identifying Adjuster (0494325)

Courtesy of BMW OF NORTH AMERICA, INC.

Storage Location

B44

C44

SI number

01 06 02 (864)

Consisting of:

4 = 0494907 Mandrel
NOTE: Replaces mandrel 51 2 194 [Released]
3 = 0494906 Guard
NOTE: Replaces guard 51 2 193 [Released]
2 = 0494474 Shaped element
NOTE: E85 (Discontinued) [Discontinued]
2 = 0494473 Mandrel
NOTE: Is replaced by 51 2 197 with the use of noise-optimized locks from 02/2004 Replaced by 51 2 197 (0 494 907) [Replaced]
2 = 0494472 Guard
NOTE: Is replaced by 51 2 196 with the use of noise-optimized locks from 02/2004 Replaced by 51 2 196 (0 494 906) [Replaced]
2 = 0494471 Upholstery
NOTE: [Released]
1 = 0494470 Nut
NOTE: (Knurled nut) Replaced by 00 9 120 (0 490 504) [Released]