33-5120 Device

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0495851 335120 Device Minimum set: Mechanical tools MW

NOTE: For removing and installing output shaft in rear axle final drive. [Released]

Storage Location

C22

A22

B22

Fig 1: Identifying Device (0495851)

Courtesy of BMW OF NORTH AMERICA, INC.

SI number

01 01 07 (333)

Consisting of:

= 0495853 Basic body
NOTE: Discontinued, only available via complete tool [cannot be ordered separately]
= 0495854 Screw
NOTE: (Knurled screw with synchronizing key) [released]
= 0495855 Rod
NOTE: Discontinued, only available via complete tool[cannot be ordered separately]
= 0495856 Shaped element
NOTE: (Shaped element) Shaped element (half-shell) Discontinued, only available via complete tool [not available separately]
= 0495857 Shaped element
NOTE: [Released]

7 = 0496795 Shaped part
NOTE: For driving output shaft into rear axle final drive. [Released]
6 = 0496765 Shaped part
NOTE: For pressing output shaft out of rear axle final drive. [Released]

In conjunction with: 33 5 120