33-5040 Open-end wrench

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0495551 335040 Open-end wrench Minimum set: Mechanical tools MW

In conjunction with: 33 5 070

NOTE: Open-end spanner SW50 with retaining clip For releasing and tightening down the insert nuts for the screw connection of the propeller shaft on the rear axle final drive. [Released]

Fig 1: Identifying Open-End Wrench (0495551)

Courtesy of BMW OF NORTH AMERICA, INC.

Storage Location

A18

SI number

01 21 06 (300)

Consisting of:

3 = 0495583 Pin
NOTE: (Pin with chain (2 pieces)) [Released]
2 = 0495582 Clip
NOTE: Discontinued, only available via complete tool [cannot be ordered separately]
1 = 0495581 Basic body
NOTE: [Released]