33-4460 Tool

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0494929 334460 Tool Minimum set: Mechanical tools MW

NOTE: For removing and installing camber arm rubber mount on rear axle support. [Released]

Storage Location

B49

C49

Fig 1: Identifying Tool (0494929)

Courtesy of BMW OF NORTH AMERICA, INC.

SI number

01 15 04 (117)

Consisting of:

5 = 0494981 Spindle
NOTE: (Spindle 205 mm, M12) [released]
1 = 0494977 Washer
NOTE: (Inserting washer) [released]
2 = 0494978 Washer
NOTE: (Pull-out disc) [Released]
3 = 0494979 Holder
NOTE: (Counter support) 0496208 = 119850 [Released]
4 = 0494980 Holding sleeve
NOTE: (Support sleeve) [released]
6 = 0494982 nut
NOTE: (Pressure nut) [released]