33-4400 Device

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0493416 334400 Device MW

NOTE: For removing inner wheel bearing race on rear axle [Released]

SI number

01 05 99 (426)

Consisting of:

Fig 1: Identifying Device (0493416)

Courtesy of BMW OF NORTH AMERICA, INC.

3 = 0493818 Wrench
NOTE: (Ignition key) Discontinued, only available via complete tool [cannot be ordered individually]
4 = 0493819 Wrench
NOTE: (Ignition key) Discontinued, only available via complete tool [cannot be ordered individually]
1 = 0493816 Basic body
NOTE: No longer available separately, only available as part of complete tool set 0493416 = 33 4 400. [Not available separately]
2 = 0493817 Spindle
NOTE: No longer available separately, only available as part of complete tool set 0493416 = 33 4 400. [Not available separately]
5 = 0493820 Pliers
NOTE: (Clamping ring (45 to 51 mm)) No longer available separately, only available as part of complete tool set 0493416 = 33 4 400. [Not available separately]
6 = 0493821 Pliers
NOTE: (Clamping ring (50 to 55 mm)) No longer available separately, only available as part of complete tool set 0493416 = 33 4 400. [Not available separately]
7 = 0494617 Pliers
NOTE: (clamping ring (55...61 mm)) Model series: E67 No longer available separately, only via complete tool set 0493416 = 33 4 400. [Not available separately]
9 = 0496539 Synchronizing key
NOTE: Series: F01, F02 Remaining inventories will be sold off and then it will no longer be available separately, only available as part of complete tool set 0493416 = 33 4 400. [Not available separately]
8 = 0496538 Ring
NOTE: (Clamping ring) Model series: F01, F02 [Released]