33-4150 Device

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0492407 334150 Device Minimum set: Mechanical tools MW

NOTE: For removing and installing the rubber mount on the rear axle support [released]

Storage Location

B15

C15

Fig 1: Identifying Device (0492407)

Courtesy of BMW OF NORTH AMERICA, INC.

SI number

01 06 94 (801)

Consisting of:

8 = 0493645 Plate
NOTE: (Pressure plate) For removing - series: E53, E65, E66, E67, RR1 [released]
9 = 0493646 Washer
NOTE: (Support disc) For installing - series: E53, E65, E66, E67, RR1 [released]

= 0492408 Plate
NOTE: (Pressure plate) For removing/series: E38, E39, E46, E52 [released]
= 0492409 Plate
NOTE: (Pressure plate) For installing series: E38, E39, E46, E52, RR1 [released]
= 0492410 Plate
NOTE: (Support plate) For installing/series: E38, E39, E46, E52 [released]
= 0492411 Spindle
NOTE: (Spindle with lock nut) Model series: E38, E39, E46, E52, E60, E61, E63, E64 [released]
= 0492412 nut
NOTE: (Nut with bearing) Can no longer be ordered separately. Only available as part of set 31 2 120 = 83 30 0 491 909. [Released]
= 0492413 Spindle
NOTE: (Spindle, long) Series: E39/2, E65, E66, E67, RR1 [released]
= 0492414 Plate
NOTE: (Pressure plate) For installing series: E39/2, E65, E66, E67, RR1 [released]