33-3330 Device

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0492322 333330 Device Minimum set: Mechanical tools MW

NOTE: For removing and installing ball joint and rubber mount in semi-trailing arm [released]

Storage Location

B14

SI number

01 10 90 (288)

Consisting of:

Fig 1: Identifying Device (0492322)

Courtesy of BMW OF NORTH AMERICA, INC.

= 0492323 Holding sleeve
NOTE: (Spacer sleeve) For pulling out/series: E36, E46 [released]
= 0492324 Holding sleeve
NOTE: (Extraction sleeve) Series: E36, E46 [released]

4 = 0492326 Holding sleeve
NOTE: (Spacer sleeve) For installing the ball joint, series: E31, E36, E38, E39, E46, E65, E66, E85 [released]
3 = 0492325 Spindle
NOTE: (Spindle with thrust nut) Replaced by 33 3 010 / 0 496 552 [replaced]